• Contact Us

• Carbon reduction technology
• Alternative technology for fossil fuels, which are the main factors of greenhouse gas generation, and technologies related to energy consumption reduction.
• Carbon resource conversion technology
• Technology that collects and separates greenhouse gases inevitable from industrial activities and recycles them as fuels and chemical materials.
• Climate Change Adaptation Technology
• Technology that supports people's adaptation to changes caused by climate change in all areas of people's lives re are three approaches to carbon reduction.

FEATURE

Carbon Optimizer® Concept for First Method
• There are two approaches to carbon reduction First - to reduce electricity demand for the implementation of the same amount of work Second - adjust the amount of energy supplied to the minimum (acceptable) current work needs.
  *1kwh savings equal 0.23314kg Co2 reduction

• The First Group of Devices

  So far Carbon Optimizer ® is the sole representative of this group Use of the Carbon Optimizer ®
  - reduces heat losses in the entire electrical circuit including the load
  - Improves the efficiency of conversion of electricity to other energy in the electric load Carbon Optimizer® works with all types of loads (inductive, resistive, and mixed) for DC and AC current.

• The Second Group of Devices

  Load control devices
  - Frequency converters
  - All kinds of controllers: Voltage, Current or Power A good example devices such as lowering the supply voltage for lighting, reduce energy consumption but provide less light All these devices are electronic, which is very significantly increase the content of harmonic distortion that is significantly increase the energy loss to heat This solution does not improve the efficiency of converting electricity to other energy Energy savings achieved with their help could be increased through savings resulting from the additional use Carbon Optimizer®

Comparison of Parameters for Two Types of “Carbon Reduction” Devices

Items	Controllers	Carbon Optimizer®
Carbon Reduction	YES	YES
Maintenance Times	More	Less
Load Condition Quality	Made Lower	Made Higher
Work Volume	Decreasing	Keeping
Safety Issue	Dependent -Load Shut Down	Independent - Load Keeping
changing load power	YES	NO
efficiency of energy conversion in the load	unchanged or decreases (unchanged)	increases

Carbon Optimizer® can be used with any other solution

Losses be made carbon in my Electrical Circuit?
• Motors, lighting systems, wiring, mechanical terminations, distribution panels, protective devices, transformers, switchgear, and all end of circuit equipment experience a variety of resistance increasing inefficiencies that combine to create an average wattage loss In a typical industrial facility of from 10% to 25% of total demand power None of us expected such a large loss of energy which is carbon in our companies